User manual ZANUSSI TL582C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANUSSI TL582C. We hope that this ZANUSSI TL582C user guide will be useful to you.
You may also download the following manuals related to this product:
ZANUSSI TL582C (391 ko)
Manual abstract: user guide ZANUSSI TL582C
Detailed instructions for use are in the User's Guide.
[. . . ] Before cleaning, care and maintenance, ensure that the machine is unplugged.
Use
This appliance is designed to be used by adults. Children should not be allowed to touch the controls or play with the product. It is dangerous to modify the specifications of this appliance in any way. If in doubt, follow the instructions you find on the label of the item itself. [. . . ] Turn the programme selector clockwise to select the chosen programme.
8. Starting of the programme
The ON/OFF pushbutton " " enables to switch on your machine. At the end of the programme
When the selected programme is over, the machine stops automatically. The timer knob stops on the position "I" for the cotton programmes. You can finish these programmes by a draining (programme P) or by a spinning (programme G). Press off the half load pushbutton if necessary ; unplug the machine from the wall socket ; turn off the water tap.
8
PROGRAMMES CHART
Programmes for cotton/linen
Maximum load : 5 kg (cotton)
Programmes description
Temperatures Detergent (°C) dispensers to use
Water consumption in liters
Time in minutes
A B C D F G
White with prewash
60 - 90
90
150
White without prewash ( )
60 - 90
*
76
135
White without prewash
40 - 60
76
110
Short programme
30 - 40
76
95
Rinsing
*
60 50
Spinning
0
5
(*) If the laundry can withstand the bleaching treatment. ( ) : The programme B (temperature selector on 60°C) is the programme for Energy Label.
When the selected programme is over, the washing machine stops automatically. The timer knob stops on the position "I" after a spinning phase
BE CAREFUL : THE LID CAN ONLY BE OPENED 90 SECONDS AFTER THE MACHINE HAS STOPPED.
9
Programmes for synthetics/delicates/wool
Maximum loads : 2, 5 kg (synthetics), 1 kg (wool). Programmes description Temperatures Detergent (°C) dispensers to use Water consumption in liters Time in minutes
H J K L M P
Synthetics with prewash
30 - 60
65
80
Synthetics without prewash 30 - 60
52
75
Delicate
- 40
52
55
Wool
- 40
55
45
Rinsing
36
20
Draining
0
5
When the selected programme is over, the washing machine stops automatically. The synthetics programmes end by a rinse hold in order to avoid the formation of creases. You can end these programmes by a draining (by setting the timer on the programme P) or by a spinning (by setting the timer on the programme G). Important : do not use methylated spirit, diluents or similar products. It is advisable, from time to time, to carry out a complete cycle without a washing load, adding a decalcifying product.
fig. 1
fig. 2
The detergent dispenser
The detergent dispenser is very easy to remove. Just turn the two screws 1/4 of a turn and slide the box towards the top (fig. 1 and fig. 2). Clean the detergent dispenser under running water with a brush or a piece of rag (fig. 3). Reposition the detergent dispenser into the lid and refix the two screws (fig. 4 and fig. 5).
fig. 5 fig. 3
fig. 4
The drain filter
The machine has got a mecanic filter located on the front part to collect lint and small objects (toothpins, coins, pins, etc) inadvertently left in the clothes. Frequency of cleaning depends on the type of articles washed (cleaning should be more frequent if the articles have no hem and tend to fray). Open the flapdoor covering the filter by pressing the left side of the filter door (fig. 1). Turn the filter anticlockwise and clean it thoroughly with running water (fig. 3). Refit the filter in the guides and turn it clockwise, then close the flapdoor.
fig. 1
fig. 2
fig. 3
14
IF SOMETHING DOESN'T WORK ?
Problems The wash results are not as usual Solutions Check that : was the wrong quantity or the wrong detergent added ?Insufficient detergent leads to grey washes and scale deposits in the machine. were programme and temperature correctly chosen ?
The washing cycle is very much too long.
Check that : the water pression is sufficient. [. . . ] They must all be removed before using your machine for the first time. These parts and their securing means should be kept in case the machine has to be transported again. Open the lid of the appliance and remove the polystyrene wedge which blocks the drum. On the back part and with a spanner, remove the two red loosened spacers (A) (fig. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI TL582C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI TL582C will begin.