User manual ZANUSSI FLS573C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANUSSI FLS573C. We hope that this ZANUSSI FLS573C user guide will be useful to you.
You may also download the following manuals related to this product:
ZANUSSI FLS573C (448 ko)
ZANUSSI FLS573C (391 ko)
ZANUSSI FLS573C (394 ko)
Manual abstract: user guide ZANUSSI FLS573C
Detailed instructions for use are in the User's Guide.
[. . . ] If the appliance is to stand on a carpeted floor make sure that there is space between the carpet and the supporting feet of the appliance for the air to circulate freely around. Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. It is dangerous to alter the the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance dos not stand on the electrical supply cable. [. . . ] P0023
Electrical connections
The applicable rules for electrical security require an adequate earthing. Make sure your socket outlet is provided with an adquate earthing too. The manufacturer declines any liability in case of accidents or incicents should these safety measures not be observed. Before plugging the appliance make sure that: 1º the mains of your installation is the same as on the rating plate of your appliance (the plate is sticked to the rear of the appliance).
44
2º The meter, the fuses, the wiring and the socket outlet can support the max. 3º The socket base and the plug must fit in adequately without any reducing interposition, multiple outlets or adapters. If necessary replace the socket outlet by an adequate one.
(Never touch the washing machine or any electric appliance while standing on a wet floor or being barefoot. )
90 cm. Max.
i
YOUR WASHING MACHINE
1 Washing powder dispenser 2 On/of lamp 3 Option buttons 4 Temperature selector 5 Program selector
1
FLS - 573C
345 2
2
1 13 12
6 The door 7 Filter 8 Nivelation
ALGODON - LINO 1 60º-90° BLANCO MUY SUCIO 2 60º-90° BLANCO SUCIO NORMAL 2 40º-60° E COLORES RESISTENTES 3 30º-40° COLORES DELICADOS ACLARADOS-BLANQUEADOS 4 PERFUMADO-SUAVIZADO 5 CENTRIFUGADO 6
SINTETICOS-MIXTOS-LANA-SEDA 7 40º-60° RESISTENTES MUY SUCIOS 8 30º-60° RESISTENTES SUCIO NORMAL 9 30º-40° DELICADOS LANA-SEDA 10 40° ACLARADOS DELICADOS 11 PERFUMADO-SUAVIZADO 12 DESCARGA 13
11
3
10 9
90°
30°
4
80 °
8
The products dispenser
Symbols
Prewash Wash Smooth
AL020
Bleach
8
7
6
5
70°
60° 50° 40
°
6
7
45
DESCRIPTION OF THE CONTROLS
Control panel
2
1 13 12
11
3
10 9
90° 80 °
30°
8
4
1
2
3
4
5
6
7
1. Washing powder dispenser
The dispenser is provided with 4 compartments marked with the following symbols: Prewash: symbol shows the compartment for the prewash detergent. Bleach: symbol shows the compartment for the bleaching additives.
5. "NO SPINNING" button
(only for programmes 1 to 6) Pressing this button before starting the "intense" washing programmes all spinnings will be excluded. Temperature selector
This control allows you to select the temperature of the washing cycle in accordance with the kind of clothes to be washed. Turn the control until the required temperature coincides with the marker. On the program table you will find the most apropriate temperature for each kind of washing. Rinse hold button
(only with programmes 7 to 12) Pressing this button together with the programs for delicate fabrics, the water will hold up in the wash tub at the end of the cycle. Program selector
To select the required program turn the control clockwise until the marker on the top coincides with the number of the required program (reference mark on the control panel). If at any chance you pass by the required number NEVER TURN THE CONTROL ANTICLOCKWISE just continue clockwise until the required number is reached again.
4. 1/2 load button
(only for programmes 1 to 4) Pressing this button before starting the intense program there will be one rinse less which leads to energy and water saving.
46
7
6
5
70°
60° 50° 4 0
°
OPERATING SEQUENCE
i
Before executing the first wash with clothes we recommend to carry out the cleaning of the drum and the barrel by a special wash, without clothes. Pour a dose of detergent in the tray department corresponding to "Wash". Wait, at least, three minutes, after the light goes off, before opening the door of the washing machine.
1. Loading the washing machine
Load the laundry loosely, alternating large items with small ones. Do not overload the washing machine, but always try to use its utmost capacity in accordance with the type of fabric. Directive 92/75.
49
Programs for synthetics, mixed and wool
Recommended load: max. [. . . ] Wait, always, till the washing program is over and there is NO WATER IN THE BARREL. When you replace the unloading filter in its place, make sure that it is correctly positioned and tight, in order to avoid water leakage or that children may take it off.
AL011 P0040
The water inlet hose filter
If it takes longer to fill up the washing machine it is time to check the water inlet hose filter it may be clogged. Remove the filter from the electrovalve and clean it with a hard bristle brush and replace it. Screw on the nut thoroughfully.
P0090
P0021
54
SERVICING
Before contacting your local Service Force Centre, check your machine against the simple maintenance guidelines given below.
Problem
The appliance does not start up
Possible solution · · · · · · · · · · · · ·
Check if the door is closed properly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI FLS573C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI FLS573C will begin.