User manual STANDARD HORIZON GX1250SA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual STANDARD HORIZON GX1250SA. We hope that this STANDARD HORIZON GX1250SA user guide will be useful to you.
Manual abstract: user guide STANDARD HORIZON GX1250SA
Detailed instructions for use are in the User's Guide.
[. . . ] ECLIPSE + GX1250SA
25 watt VHF/FM Marine Transceiver
Owner's Manual
Simple Operation Submersible Microphone Programmable Scan & Priority Ch16 Scan NOAA Weather Alert Backlit LCD & Keys
STA
ND
HOR ARD
IZON
VOL/ PWR
TABLE OF CONTENTS
FCC NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2 FCC/ INDUSTRY CANADA INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the H/L key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is pressed. The H/L key does not function on transmit inhibited and low power only channels. UP and DOWN Keys The UP and DOWN keys are used to select channels.
r EXTERNAL SPEAKER JACK
Connects an optional external speaker to the transceiver. Use a speaker with an impedance of 4 or 8 ohms, with an RCA phono plug.
t ANTENNA JACK
Connects an antenna to the transceiver. Use a marine VHF antenna with an impedance of 50 ohms.
page 8
Owner's Manual
GX1250SA
y DC INPUT CABLE
Connects the transceiver to a DC power supply of 13. 8V ± 20 %.
u PTT (Push-To-Talk) SWITCH
Keys the transmitter when the transceiver is in radio mode. If the transceiver is in the intercom operation mode, it activates the microphone for the intercom.
i Submersible MIC
This microphone's water-resistant is equivalent to JIS Class 7th.
o UP
and DOWN
KEYS
The UP and DOWN on the mic function the same as the The UP and DOWN keys on the front panel of the transceiver.
!0 16/9 Key
Pressing the 16/9 key Immediately recalls channel 16 from any location. At the rear of the transceiver, connect the antenna cable to the antenna jack. RG8 or RG213 coaxial cable must be used if the antenna is 25 feet or more from the transceiver. It is advisable to have a Certified Marine Technician check the power output and the standing wave ratio of the antenna after installation.
4. 3 INSTALLATION USING REGULAR MOUNTING BRACKET
1. Position the transceiver within the bracket arms, matching the transceiver notches to obtain the desired positioning. Secure the transceiver to the brackets with the mounting knobs (see Figure 4). Connect the antenna and power cables (and optional speaker) to the transceiver.
Figure 4. Regular Mounting Bracket
GX1250SA
Owner's Manual
page 13
4. 4 CMB16 FLUSH MOUNT INSTALLATION
1. Make a rectangular template for the flush mount measuring 2 inches (50 mm) H x 5 3/8" inches (135 mm) W. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accommodate the transceiver (at least 6 inches deep). There should be at least 1/2 inch between the transceiver's heatsink and any wiring, cables or structures. Fasten the brackets to the sides of the transceiver with the lock washer nut combination, so that the mounting screw base faces the mounting surface (see Figure 5). Turn the adjusting screw to adjust the tension so that the transceiver is tight against the mounting surface. CMB16 Flush Mount Installation
page 14
Owner's Manual
GX1250SA
5
5. 1 RECEPTION
OPERATION
1. After the transceiver has been installed, ensure that the power supply and antenna are properly connected. Turn up the volume until noise or audio from the speaker is at a comfortable level. [. . . ] 13. 8 VDC ± 20% Current Drain Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 5A Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5A Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6A (Hi); 1. 7A (Lo) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STANDARD HORIZON GX1250SA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual STANDARD HORIZON GX1250SA will begin.