User manual MIELE DA 5294 W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE DA 5294 W. We hope that this MIELE DA 5294 W user guide will be useful to you.
![]() |
Manual abstract: user guide MIELE DA 5294 W
Detailed instructions for use are in the User's Guide.
[. . . ] Operating and installation instructions
Cooker hood DA 5294 W DA 5294 W EXT
To avoid the risk of accidents or damage to this appliance it is essential to read these instructions before it is installed and used for the first time.
GiWOZ
M. -Nr. 35
2
Caring for the environment
Disposal of the packing material
The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. cling film, polystyrene and plastic wrappings must be kept out of the reach of babies and young children. Dispose of or recycle all packaging materials safely as soon as possible.
Disposal of your old appliance
Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. [. . . ] If you only cook occasionally we recommend that you still select a short time, because grease which has built up gradually over a long period of time will harden on the grease filter and make cleaning more difficult. The operating hours counter for the grease filters is set at the factory for 30 hours. The time set can be lengthened or shortened: you can choose 20, 30, 40 or 50 hours.
The / + indicator lamps show the time which has been set: 1st lamp from the left = 20 hours 2nd lamp from the left = 30 hours 3rd lamp from the left = 40 hours 4th lamp from the left = 50 hours ^ Use the / + controls to select the desired time.
^ Confirm the selection by pressing the operating hours control. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data.
^ Press the On/Off control to switch the fan off.
^ Press the run-on option control and the operating hours control at the same time. The red indicator lamp for the operating hours control and one of the / + control lamps will flash.
16
Operation
Activating and altering the operating hours counter for the charcoal filter (only for recirculation mode) The charcoal filter is needed for recirculation mode. On delivery, the operating hours counter for the charcoal filter is switched off, and is set at unlimited. For recirculation mode, the operating hours counter needs to be set to the required time. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data.
Resetting the operating hours counter for the charcoal filter ^ Press the On/Off control to switch the fan off. The indicator lamp for the operating hours control will light up blue after the cooker hood has operated for the number of hours set. Afterwards, the filter operating hours counter must be reset.
^ Press the + control and the operating hours control at the same time. The blue indicator lamp for the operating hours control and one of the / + control lamps will flash.
^ To do this, press and hold the operating hours control for about 3 seconds while the fan is switched on. The /+ control lamps show the time which has been set: 1st lamp from the left = 120 hours 2nd lamp from the left = 180 hours 3rd lamp from the left = 240 hours 4th lamp from the left = unlimited ^ Use the / + controls to select the desired time.
17
The indicator lamp for the control will go out.
Operation
Reading the operating hours counter for the charcoal filter To check the percentage of time set already used:
^ Press the On/Off control to switch the fan on.
^ Press the operating hours control twice in succession, and hold it pressed in. The indicator lamp will light up blue.
One or more of the indicator lamps for the / + controls will flash. The number of flashing lamps shows the percentage of the operating time which has already been used up. 1 lamp 2 lamps 3 lamps 4 lamps = 25 % = 50 % = 75 % = 100 %
The number of operating hours used remains in the memory, even when the appliance is switched off or there is a power cut.
18
Cleaning and care
Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply. Ensure that: it is switched off at the isolator, or it is switched off at the wall socket and the plug removed, or the fuse is withdrawn from the fused spur connection unit, or the mains fuse is withdrawn, or the screw-out fuse is removed (in countries where this is applicable). E-Cloth A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. Do not use: cleaning agents containing soda, acids, chlorides or solvents, abrasive cleaning agents, e. g. powder cleaners or cream cleaners and abrasive sponges, as well as pot scourers or sponges which have been used previously with abrasive cleaning agents. Important for appliances with stainless steel housing (This infomation does not apply to the controls). Stainless steel surfaces can be cleaned using the Miele E-Cloth, or with a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel. To help prevent re-soiling, a conditioning agent for stainless steel such as Neoblank (available from the Miele UK Spare Parts Department) can also be used. [. . . ] Do not connect the appliance to the mains electricity supply by an extension lead. Connection of this appliance should be made via a suitable isolator or a double pole fused spur connection unit which complies with national and local safety regulations and the On-Off switch should be easily accessible after the appliance has been built in. When switched off there must be an all-pole contact gap of 3 mm in the switch (including switch, fuses and relays according to EN 60335). If the switch is not accessible after installation (depending on country), an additional means of disconnection must
31
For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE DA 5294 W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE DA 5294 W will begin.