User manual LIFT-MASTER POWERHINGE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LIFT-MASTER POWERHINGE. We hope that this LIFT-MASTER POWERHINGE user guide will be useful to you.
Manual abstract: user guide LIFT-MASTER POWERHINGE
Detailed instructions for use are in the User's Guide.
[. . . ] Power HingeTM Installation
A Weld Hinge to Post
Clamp the outside of the hinges to the post using a metal bar between the clamp and hinge as shown. [. . . ] Once you have a strong weld remove the clamps and metal bar used for alignment. Post Post
B Weld Hinge to Gate
Clamp the inside of the hinges to the gate using the metal alignment bar as shown. Make sure the gate and post is even and that the hinges are level and aligned. Weld inside hinge halves to gate making sure you weld all four sides of each hinge. [. . . ] All Rights Reserved
TM
Important Precautions!
C Proper Alignment
It is very important, for smooth and proper operation of the gate, that the hinge shafts are in line and level.
D Improper Alignment
Improper installation of the hinges will result in poor gate operation and shearing of the shafts.
A
A
Post
B
Post
B
01-50690
®
845 Larch Avenue Elmhurst, Illinois 60125-1196 For technical support: 1-800-528-2806 www. chamberlain. com
TM [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LIFT-MASTER POWERHINGE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LIFT-MASTER POWERHINGE will begin.