User manual LIFT-MASTER 92LM
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LIFT-MASTER 92LM. We hope that this LIFT-MASTER 92LM user guide will be useful to you.
Manual abstract: user guide LIFT-MASTER 92LM
Detailed instructions for use are in the User's Guide.
[. . . ] Model 92LM Security& 2-Channel Remote Control
OWNER'S MANUAL
NOTICE: To comply with FCC rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
WARNING
Children operating or playing with a garage door opener can injure themselves or others. [. . . ] Its code can be matched to other CGI manufactured fixed code or billion code remotes. The code between this channel and the receiver remains constant until reprogrammed. WHEN USED WITH SECURITY& GARAGE DOOR OPENERS To program the opener to accept the remote control code: 1. Press and release the "Smart" (learn) button on the opener panel. The indicator light on the panel will begin to blink and the opener lights will flash once. Adding a remote can also be done from the door control, as follows: 1. TO ERASE ALL REMOTE CONTROL CODES FROM THE RECEIVER Press and hold the "Smart" button on the opener panel until the indicator light turns off (about 6 seconds). Then follow the steps above to re-program each remote control.
CAUTION
Model 92LM SECURITY& Remote Control
Yellow battery indicator light Smooth push button Grooved push button
SECURITY& Garage Door Opener
1 2 3
9 7 5 3
1
9 7 5 3
1
KG
KG
"Smart" (learn) Indicator light button
Figure 1
Figure 2
WHEN SEVERAL REMOTES OPERATE ONE DEVICE To match the 92LM to another CGI manufactured remote's code (Remote Control X): 1. Press and hold both push buttons of the 92LM until the battery indicator light begins to blink. (It will blink for 30 seconds; during this time it is in "learn" mode. ) 2. [. . . ] This code will remain inside the remote control until replaced with a new code by repeating the above steps.
AVERTISSEMENT
Replacement Parts
Model 92LM Security& remote case, cover, screw (circuit board not included) . . 29C128
FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131
114A2170
© 1997, Chamberlain Group Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LIFT-MASTER 92LM
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LIFT-MASTER 92LM will begin.