User manual LIFT-MASTER 65 5211
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LIFT-MASTER 65 5211. We hope that this LIFT-MASTER 65 5211 user guide will be useful to you.
Manual abstract: user guide LIFT-MASTER 65 5211
Detailed instructions for use are in the User's Guide.
[. . . ] HIGH CYCLE MODIFICATION
For 1/3 and 1/2 HP Operator Models T and SD
APPLICATION REQUIREMENTS
This modification is available for model T and SD 1/3 and 1/2 HP operators. [. . . ] ALL electrical connections MUST be made by a qualified individual.
CAUTION
WARNING
PACKING LIST DESCRIPTION Shaft, High Cycle Modification Pillow Block Bearing Sprocket, 41B10 3/4" Bore Hex Bolt, #3/8-16 x 1-1/4" Long Serrated Flange Nut 3/8" Flatwasher 3/8" Roll Pin, 1/4" X 1-3/4" QTY 1 2 1 4 4 8 1
HIGH CYCLE MODIFICATION
FIGURE 1
2''
Front Bracket Removed For Clarity
1
I N S TA L L AT I O N I N S T R U C T I O N S
1. With the front bracket in place, slide the pillow block idler assembly into the track. Drill four (4) holes (3/8" diameter) in the track, using the holes in the bearings for guides (Figure 1). Fasten in place, be sure to use flatwashers over the slots in the bearing (Figure 2). [. . . ] Hex Bolt 3/8" Flatwasher
3/8" Serrated Flange Nut
FIGURE 3
Roll Pin Sprocket Shaft
. 750 Dia.
1. 13"
4. 50"
Centerline
FIGURE 4
Bearing
5. 125" to 5. 250"
01-12012B
© 2005, The Chamberlain Group, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LIFT-MASTER 65 5211
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LIFT-MASTER 65 5211 will begin.