User manual HOOVER RILS9514TI
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOOVER RILS9514TI. We hope that this HOOVER RILS9514TI user guide will be useful to you.
Manual abstract: user guide HOOVER RILS9514TI
Detailed instructions for use are in the User's Guide.
[. . . ] We are proud to always offer new, innovative and technologically advanced products, with a complete range of home appliances to ensure true assistance in your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Environmental conditions
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). [. . . ] The machine is fitted with a special  electronic device, which prevents the TEMPERATURE SELECTION button
lï¬ This button allows you to change the
temperature of the wash cycles. NIGHT & DAY button
lï¬ This option reduces the intermediate spin
speed to 400 rpm, where applicable, increase the water level during rinsing and keep the laundry immersed in water after the final rinse, in order to spread the fiber perfectly. Lï¬ It is not possible to raise the temperature
over the maximum allowed for every programme, in order to save the fabrics. SPIN SELECTION button
lï¬ By pressing this button, it is possible to
reduce the maximum speed, and if you wish, the spin cycle can be cancelled. Lï¬ During the phase in which the water is
held in the tub, the relevant indicator light blink to show that the machine is at a standstill. Lï¬ If the label does not indicate specific
information, it is possible to use the maximum spin expected in the program. To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme. Lï¬ Deselect the option to end the cycle with
a spin dry (which may be reduced or cancelled using the appropriate button) and emptying phase. Lï¬ Thanks to electronic control, the water in
the intermediate phases is emptied silently, making this option very useful for washing at night. 105
EN
KEY LOCK
lï¬ Pressing
simultaneously the buttons TEMPERATURE SELECTION and SPIN SPEED for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically delete. In this case, close the door in the proper way and press the START/PAUSE button. Lï¬ Wait until the DOOR LOCKED light has
gone out before opening the door. 2) SPIN SPEED This show the spin speed of the selected programme that can be changed or omitted by the relevant button. 3) WASH TEMPERATURE LIGHTS INDICATOR
lï¬ The key lock can be simply cancelled by
pressing the two buttons simultaneously again or turning off the appliance. Digital Display
The displayâs indicator system allows you to be constantly informed about the status of the machine. This shows the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. 4) CYCLE DURATION
3
1 2 7 84 9
5
6
lï¬ When a programme is selected the
display automatically shows the cycle duration, which can vary, depending on the options selected. 6
lï¬ Once the programme has started you will
be kept informed constantly of the time remaining to the end of the wash. 1) DOOR LOCKED INDICATOR LIGHT
lï¬ The appliance calculates the time to the
end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load. 5) STAIN LEVEL INDICATORS LIGHTS
lï¬ The indicator light is illuminated when the
door is fully closed. [. . . ] This may be due to a leak from the seal between the tap, supply hose and fill valve; in this case, replace it and tighten the hose connections correctly. The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. This may result in:⢠The machine attempts to balance the load, increasing the time of spin. If this is experienced remove the load de-tangle it, reload it and restart the spin program. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HOOVER RILS9514TI
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOOVER RILS9514TI will begin.