User manual HOOVER PRB2500B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOOVER PRB2500B. We hope that this HOOVER PRB2500B user guide will be useful to you.


HOOVER PRB2500B : Download the complete user guide (10642 Ko)

Manual abstract: user guide HOOVER PRB2500B

Detailed instructions for use are in the User's Guide.

[. . . ] Ensure before each use that the electric cord or any Other important part is not damaged. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down. Never direct the steam jet towards any other electrical or/and electronic appliances. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. [. . . ] 5 minutes, the steam ready light (14) will light off, then you can start ironing. Important: if you want to switch from Dry mode to Steam mode, press steam ON/OFF button and wait around 2min for boiler heating up then press trigger, steam will come out. If you want to switch from Steam mode to Dry mode, press steam ON/OFF button, you will see the light behind the button is off, then no steam will come out. The first time the appliance is used, some fumes, dust and a smell should appear. This is due to a treatment applied to the soleplate that improves the steam performance. Select the temperature of the soleplate by turning the dial (12) on the iron to the desired position. This indicates that the soleplate has reached the required temperature. While Ironing, the Iron light may switch on and off, this indicates that the temperature is being Adjusted automatically to maintain temperature so as not to interrup your ironing. Help To know the best suitable temperature for each textile, check the laundry care label of the article to be ironed. Please note that during use, the temperature light goes on from time to time. When ironing material with mixed fabrics, always ensure the temperature is set to the correct setting. If you select a lower temperature while ironing, wait until the iron has cooled down to the set temperature before you continue ironing. If the temperature is too low, some drops of water could escape from the soleplate. Please raise up the temperature above the 2 dots (· Select the temperature of the soleplate following the indications of chapter 2. Start your ironing without pressing the steam ON/OFF button (15), when the soleplate reaches the appropriate temperature. Select the temperature of the soleplate following the indications of chapter The steam will be ready to be used after press "steam ON/OFF" button, When steam ready light (14) disappear. During use, it is normal to experience some noise coming from your steam generator. It's better to avoid using the steam trigger at this precise moment to avoid pressure falls. To obtain the best results, it is really important to set the correct temperature of the soleplate and the steam flow you are using. If correctly used, it will simplify your ironing and provide outstanding results, making ironing easier and faster. When steam ironing clothes on which shiny patches may occur, we recommend you to set the soleplate temperature to a lower temperature or iron the garment on the reverse. Start with the fabrics that needed to be ironed at a lower temperature (· ) and finish with those that needed to be ironed at the higher temperature (· Set the soleplate temperature (12) to the max temperature. [. . . ] The appliance does not produce steam The appliance is not switched on. The appliance is not switched on Check the mains cord, the plug and the wall socket press on the on/off switch Set a higher temperature of the soleplate Press on the on/off switch The steam ON/OFF button is not switched on The boiler may be empty Wait a few moments until the steam ready light switch on You are not pressing the steam trigger Refill the water tank The soleplates becomes dirty or brown The soleplate temperature is set to the maximum It works but steam is not visible as very hot and dry There should be chemical or additives Never use any chemical or additives in the In the water used for ironing The linen is still dirty Some scale deposit appears on the soleplate The linen is still dirty Your ironing board cover is saturated in water Your boiler has not been rinsed for a while Clean the soleplate with a non-metallic sponge Change the cover or use a mesh ironing board Follow the indications in the appropriate chapter These are available from your local Hoover dealer or direct from Hoover. Hoover Service Should you require service at any time, please contact your local Hoover Service Office. Safety Hoover believes that independent approval is the best way of demonstrating safety in design and manufacture. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOOVER PRB2500B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOOVER PRB2500B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.