User manual CANDY CDI 4545-S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANDY CDI 4545-S. We hope that this CANDY CDI 4545-S user guide will be useful to you.
You may also download the following manuals related to this product:
CANDY CDI 4545-S (1495 ko)
CANDY CDI 4545-S ANNEXE (440 ko)
Manual abstract: user guide CANDY CDI 4545-S
Detailed instructions for use are in the User's Guide.
[. . . ] Any faults which occur due to bad installation or misuse of the machine. Any faults which occur due to repair of, or interference with, the machine by any person not authorised by the manufacturer to carry out service. Any faults which occur due to any parts which are fitted to the machine which are not the original manufacturers parts. [. . . ] Any faults arising from non-domestic use or unusual or abnormal use of the machine. The guarantee applies to Gt Britain and Northern Ireland only, and is an addition to your statutory rights. For service and repairs call your local engineer on our national telephone number: EN 50242 place load Capacity with pans and dishes Water supply pressure Fuse Power input Supply voltage The relevant LED will stop blinking and remain on and, when the door is shut, the program will start automatically. If malfunctions or faults occur when a program is running the LED that corresponds to the selected cycle (2 LEDs for the "COLD RINSE" program) will blink rapidly. In this case, turn the dishwasher off by pressing the "ON/OFF" button. After checking to make sure the water intel hose tap is open, that the drain hose is not bent and that the siphon or filters are not clogged, set the selected program again. After pressing the "ON/OFF" button, the LED for the factory set is "recommended" (which is ideal for full load daily use) or the LED for the "Auto' Memory" program (see below) will blink. The option button must be pressed BEFORE the program starts for the option to be accepted. Proceed as follows to change or cancel a running program: Hold down the current program button (with the LED on) for at least 3 seconds. "HALF LOAD" button By using this option, it is possible to wash a smaller quantity of crockery: you should load only the upper basket for dishes and place cutlery in the tray in the bottom basket. This reduces water and energy consumption and requires a smaller quantity of detergent. Don't switch off the dishwasher, before the end of the water discharge. The running program will be cancelled and the LED for the "recommended" program or the LED for the program that was used at least 3 times consecutively will start to blink. ("RECOMMENDED" PROGRAMME) Once a day - for normal soiled pans and any other items that have been left all day for washing. [. . . ] The running program will be cancelled and the LED for the "recommended" program or the LED for the program that was used at least 3 times consecutively will start to blink. ("RECOMMENDED" PROGRAMME) Once a day - for normal soiled pans and any other items that have been left all day for washing. Once a day - for heavily soiled pans and any other items that have been left all day for washing. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CANDY CDI 4545-S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANDY CDI 4545-S will begin.